Elkær branch saws are designed for mounting on excavators, Stiga and Husqvarna garden and park machines, mowers, compact tractors, tractors, telescopic loaders, wheel loaders or trenchers.
They are particularly suitable for maintaining all kinds of hedges and both light and heavy windbreaks with a branch thickness up to 25 cm. The design makes it possible to operate the saws at a high average speed for efficient trimming of large hedges and fences. Their flexibility also allows you to target individual branches.
Branch saws provide a very smooth and clean cut and are available in working widths from 130 cm right up to 5 metres.
Contact our sales department to learn more about ELKÆR products.
The ELKAER HS800 Saw is ideal for forestry work or overgrown hedges.
With the HS800 Saw, the operator can make use of both the strength and the pinpoint precision of the excavator, to cut out single branches with the articulated arm. The clean cut of the HS800 provides an excellent re-growth and the Ø800mm sawblade is able to cut branches of as thick as 250mm. The HS800 saw can be mounted to almost any excavator.
The HS1300 is developed for the use on lawnmowers and small tractors, fx. narrow track tractors.
The working width of the HS1300 is 130cm, and it can cut branches of up to 100mm in diameter. The HS1300 is able to – due to a very lightweight construction – be mounted to the Termite reach arm in the quickshift, which gives you maximum flexibility. The HS1300 has 3x Ø450mm sawblades and can be run with just 20 liters /min. of oil and upwards.
The HS1300 enables very lightweight carriers, to enjoy the efficiency of an powerful Elkær saw.
The HS1750 has been developed to suit the dimensions of mini-loaders, smaller tractors, e.g. park tractors.
The HS1750 is equipped with 3x Ø600mm sawblades, which enables it to cut branches of up to 150mm in thickness. The HS1750 is well suited for the purpose of maintain all kinds of hedges, bushes and trees, and it will effectively cut branches with clean cuts. The work speed is normally about 4 km/h, and up to 8 km/h at max., which gives this hedge saw a great work-capacity. The HS1750 is compatible with all Elkær reach arms, and can be mounted to reach arms and booms from other manufacturers as well.
All of our saws have been designed with offset blades in order to avoid the branches getting jammed, thus enabling you a relative high speed of work.
The HS2300 is very efficient cutting heavy hedges and shelterbelts with branches up to 250mm in diameter.
The HS2300 saw is equipped with 3x Ø800mm sawblades and it is compatible with most of our loader-frames and reach arms to be mounted onto loaders, tractors, telescopic handlers or excavators.
The HS3800 saw is designed with 5x offset blades, making it highly efficient tool for maintenance of heavy hedges, forest paths and shelterbelts with branch thicknesses of up to 250mm.
The construction with the offset blades and the huge working width ensures a high very high work speed, with the ability to cut most hedges and trees in just one run, without the need to go over the work area more than once. The HS3800 combines with the reach arms HK Ex, HK Pro-X or HK Max, and powerful reach arms from other manufacturers.
When we developed the HS5000 saw, we had a clear goal in sight: to provide a saw with an unmatched reach-to-weight ratio.
The HS5000 has been carefully designed for this purpose, thus supplying you with the combination of a large working width, and a low weight of the saw itself. Traditional hedge-saws have been constructed from the principle of providing a working width equal to the number of saw blades equipped. But this is not the case with the HS5000 – providing a working width of 500cm, with the use of 2x Ø800mm sawblades. This way you are able to trim hedges in just one go, whereas today one often ahs to repeat the trimming 2-3 times in order to get the job done properly.
